Welcome to Dongguan Kingming Hardware Plastic Technology co.,Ltd.
Contact Us
[[Zhen Ming] How can the dirt on the shoe buckle hardware be effectively removed?]
Release date:[2019/4/11] Read a total of[765]time

Mechanical operation in hardware processing In order to meet lubrication, heat dissipation and other requirements, it is necessary to add metal processing aids such as stamping oil and stretching oil. However, the surface of the shoe hardware produced after the addition of the additive will have a lot of dirt. Then, how to remove the dirt on the shoe hardware.


20180725101518_1746.jpg


Dongguan Zhenming shoe buckle hardware


The type of dirt on the shoe buckle hardware is more diverse, including oil, grease, fingerprints, metal dust, and some watermarks.


The shoe hardware processing depends on the quantity, so the batch quality of cleaning is very important. For this requirement, the cleaning method can be immersed or ultrasonically cleaned.


Soaking is very simple. Use 50-60 degrees of hot water to convert to 5% working solution. Then use a mesh basket to load the shoe hardware and soak it directly into the cleaning solution. After 1-2 minutes, the washing basket is lifted up and down to play a role of washing. Soak for another 1-2 minutes, then rinse again and remove. After that, the washing liquid on the surface is removed by washing with water several times. Finally, according to the structure of the shoe buckle hardware, the water can be dried and dried.


There are two main points to note. One is the washed water, the principle of washing clothes is similar, it takes too much or two to completely remove the cleaning solution. In addition, tap water contains a lot of impurities, leaving a circle of watermark after drying. If the surface of the shoe hardware is high, pure water should be used at the end of the water rinse.


The ultrasonic cleaning method is the same as the immersion method, except that the ultrasonic cleaning is used for cleaning and cleaning. It should be pointed out that the ultrasonic wave only assists in enhancing the cleaning effect, and the key to the cleaning of the shoe buckle hardware is the cleaning agent.


Dongguan Zhenming Hardware & Plastic Technology Co., Ltd. is a professional manufacturer of shoe buckles, mainly including: shoe buckles, shoe buckle accessories, shoe buckle hardware, shoe buckles, luggage hardware, luggage hardware accessories, luggage hardware buckles, luggage buckles And other hardware products.